Most Popular

Flame Seal FX950 (Class A Paint) - 5 Gallon

Flame Seal FX950 (FX950) is a water-based Intumescent paint that can be applied to most substrates including, lumber, plywood, OSB, and Gypsum. FX950 is fully tested and has a rating ranging from Class A to 2 hours to meet building codes domestically, internationally, and for the Wildfire Urban Interface. When Flame Seal FX950 is exposed to fire or extreme heat, a protective layer of Carbon Foam develops and prevents the fire and heat from transferring to the substrate. FX950 is a low VOC fire retardant paint with a smooth white architectural grade finish. This product can be paired with a primer and a top coat. For best application Flame Seal recommends using an airless sprayer, please see application guide for more information.

$375.00 USD

Wood Seal A - 5 Gallon

Wood Seal A™ (WSA™) is an application ready, water based fire retardant designed for treatment of raw wood. It is mix of proprietary ingredients, which forms a slight intumescent foam layer and carbon char when the treated wood is exposed to fire. Once the carbon char is formed there will be minimal flame propagation, smoke evolution or afterglow. The product is designed for interior use only.

$350.00 USD

Spray Foam Coatings

Ignition Barrier - 5 Gallon

FS-IB™ Ignition Barrier is a single component, water-based latex coating for use as an ignition barrier over interior Spray Polyurethane Foam (SPF) insulation. FS-IB™ uses intumescent technology to protect SPF from flame source impingement. FS-IB™ is designed specifically as a protective coating over spray foam insulation in non-occupied areas, such as crawl spaces and uninhabited attics in both residential and commercial structures. The product has been tested successfully under the AC 377, Appendix X test method. FS-IB™ is fast drying and easy to use with standard commercial airless spray equipment.This is a professional coating and should only be used by trained professionals. If you would like to be trained please contact flameseal@flameseal.com

$300.00 USD

TB-C - White

Flame Seal TB-C™ is the first and only thermal barrier coating approved, under ULC S124-06, over spray polyurethane foam (SPF) in Canada. Flame Seal TB-C™ meets all requirements of the Canadian National and Provincial Building Code 3.1.5.12 standard, giving a new advanced option for SPF protection for the Canadian market. Flame Seal TB-C™ comes in 5 colors; white, three shades of gray, and black; giving options to design professionals. White is the standard color, while the others typically require a two week lead time.This product is for Canada onlyThis is a professional coating and should only be used by trained professionals. If you would like to be trained please contact flameseal@flameseal.com

$350.00 USD

Wood Products

Wood Seal - 5 Gallon

Wood Seal™ is an application ready, water based fire retardant designed for treatment of raw wood. Wood Seal™ is mix of proprietary ingredients, which forms a slight intumescent foam layer and carbon char when the treated wood is exposed to fire. Once the carbon char is formed there will be minimal flame propagation, smoke evolution or afterglow. The product is designed for interior use as well as exterior in certain circumstances.

$340.00 USD

Wood Seal A - 5 Gallon

Wood Seal A™ (WSA™) is an application ready, water based fire retardant designed for treatment of raw wood. It is mix of proprietary ingredients, which forms a slight intumescent foam layer and carbon char when the treated wood is exposed to fire. Once the carbon char is formed there will be minimal flame propagation, smoke evolution or afterglow. The product is designed for interior use only.

$350.00 USD

Shingle Seal - 5 Gallon

Shingle Seal™ is an application ready, water-based fire retardant designed for treatment of wood roofing and/or siding shingles. Shingle Seal™ is mix of proprietary ingredients, which forms a slight intumescent foam layer and carbon char when the treated shingle or shake is exposed to fire. Once the carbon char is formed there will be minimal flame propagation, smoke evolution or afterglow. The product is designed for exterior use. Under simulated test conditions of 200 inches of rain, Shingle Seal passed ASTM E-108 test series on Cedar Roof Shingles. 

$350.00 USD

Fabric

Fabric Seal Synthetic - 32 oz

Fabric Seal S™ Synthetic Fibers (FS-S™)is an application ready, water based fire retardant designed for treatment of synthetic fabrics. FS-S™  is mix of proprietary ingredients, which forms a carbon char when the treated fabric is exposed to fire. Once the carbon char is formed there will be minimal flame propagation, smoke evolution or afterglow. The product is designed for interior use only.

$39.99 USD

Fabric Seal Natural - 32 oz

Fabric Seal N™ Natural Fibers (FS-N™) is an application ready, water-based fire retardant designed for treatment of natural fabrics. FS-N ™ is a water-borne mix of proprietary ingredients, which forms a carbon char when the treated fabric is exposed to fire. Once the carbon char is formed there will be minimal flame propagation, smoke evolution or afterglow. The product is designed for interior use only.

$39.99 USD

Fabric Seal Concentrate - 32 oz

Fabric Seal C™ Concentrate (FS-C™) is a concentrated, water-based fire retardant designed for treatment of fabrics. Fabric Seal C™ is water-borne mix of proprietary ingredients, which forms a carbon char when the treated fabric is exposed to fire. Once the carbon char is formed there will be minimal flame propagation, smoke evolution or afterglow. The product is designed for interior use only.

$59.99 USD